专业生产加工电缆支架涂塑电缆支架、包塑电缆支架、热镀锌电缆支架
咨询热线:15589928777
0531-88606796
公司动态

当前位置:主页 > 新闻资讯 > 公司动态 >

电缆支架一般设在什么地方?

2017/07/03  浏览次数:

  都安装在电缆支架中,以下就是安装条件,还有在电缆沟外面还有电缆沟桥架不知道是不是你也要问的。设电缆支架的条件:

  All installed in the cable support, the following is the installation conditions, as well as in the cable trench outside there are cable ditch bridge, I do not know whether you have to ask. Conditions for setting up cable support:

  1.电缆支架,电缆渠道的净宽及大小选择支架规格。SFZ–3/540支架适用于放置三根电缆,SFZ–2/430支架适用安置二根电缆。如有特殊要求,可根据实际情况定制。

  1. cable bracket, width and size of cable channel selection support specifications. The SFZ - 3/540 bracket is suitable for placing three cables, and the SFZ - 2/430 bracket fits for placing two cables. If you have special requirements, you can customize it according to the actual situation.

  2.环境适宜温度范围:-20——+70°。

  2., the environment suitable temperature range: -20 - +70 degrees.

  3.安装宜水平走向,如倾斜则需采用其他措施固定电缆。

  3., installation should be horizontal direction, such as tilt, you need to use other measures to fix the cable.

  4.要求平衡、竖直,同侧支架水平间距80厘米,双侧支架错开安装,保证支架均衡承载。

  4., balance and vertical, the same side support horizontal spacing of 80 cm, bilateral stent stagger installation, to ensure that the stent balanced loading.

  5.支架预埋时须保证支架基座与砌墙混凝土充分咬合、密实、与固定墙面保持直角状态,保证底座受力面积,避免扭曲。铺设电缆时,宜采用自上而下铺设,拖动电缆时宜水平拖动。

  5. bracket embedded bracket base and concrete walls to ensure sufficient engagement, compacting, and fixed wall to keep the right state, ensure the base force area, to avoid distortion. Laying cables should be laid down from top to bottom, and the cables should be dragged horizontally.

  • 山东久丰伟业不锈钢工程有限公司  联系人:刘经理; 
  • 电话:0531-88606796; 传真:0531-88601877
  • 手机:15589928777;   网址:www.sdjfwy.cn    
  • 地址:济南市历城区工业北路159-19号
  • 技术支持:企力网一站式网络营销推广方案
  • 备案号:鲁ICP备16041896号-2
  • 网站地图 /XML地图
网站声明:

本站部分素材搜集来源网络,如内容有侵权,请联系我司立即删除!本站内容按照相关法律法规进行编写;如有不当请联系我司立即删除!

在线客服