专业生产加工电缆支架涂塑电缆支架、包塑电缆支架、热镀锌电缆支架
咨询热线:15589928777
0531-88606796
常见问题

当前位置:主页 > 新闻资讯 > 常见问题 >

电缆支架安装距离是多少?

2017/06/22  浏览次数:

  大多的人都应当晓得如今电缆支架的运用十分的存在广泛,在电力动工之中电缆沟墙壁上安排处置电缆支架,一看就晓得是托载支架起到支持的效用,实际上这只是一个方面的原故,支架另有一个效用就是散热了。由于有过电会使电缆显露出来数量多的卡路里,温度会颀长,影响了电缆的载流量,电缆寻常都疏散摆放,室外电缆沟安排处置支架是务必的,这个利于散热。

  Most of the people should know now use cable support very widespread, disposal arrangements of cable support in power started among cable trench walls, a look at just know is a carrier bracket to support the utility, actually this is only one aspect of the reason, support another utility is the heat. Because had electricity cable revealed a large number of calories, the temperature will be long, affects the ampacities of cables, cable is usually placed outdoor evacuation, cable trench support disposal arrangements is a must, for this heat.

  一、电缆支架层架间间距:

  one. spacing between cables and brackets:

  (1)电力电缆200mm;

  (1) power cable 200mm;

  (2)扼制电缆150mm;

  (2) 150mm control cable;

  二、延长米间距支点距离:

  Two, extend the distance between meters, fulcrum distance:

  (1)电缆支架领导至立井顶部或楼板的距离不小于150~200mm;电缆支架下层至沟底或地面的距离不小于50~100mm。

  (1) the distance between the cable bracket and the top of the vertical shaft or the floor shall be no less than 150 to 200mm; the distance between the bottom of the cable bracket and the bottom of the ditch or the ground shall be no less than 50 to 100mm.

  (2)全塑型的电缆,其支架水准净距普通为0.4mm。

  (2) fully molded cable, its bracket level distance is usually 0.4mm.

  以上是电缆支架间准许的小距离,电缆支架间距的有关应答。

  The above is the minimum distance permitted between the cable brackets and the relevant responses of the cable support spacing.

  • 山东久丰伟业不锈钢工程有限公司  联系人:刘经理; 
  • 电话:0531-88606796; 传真:0531-88601877
  • 手机:15589928777;   网址:www.sdjfwy.cn    
  • 地址:济南市历城区工业北路159-19号
  • 技术支持:企力网一站式网络营销推广方案
  • 备案号:鲁ICP备16041896号-2
  • 网站地图 /XML地图
网站声明:

本站部分素材搜集来源网络,如内容有侵权,请联系我司立即删除!本站内容按照相关法律法规进行编写;如有不当请联系我司立即删除!

在线客服