专业生产加工电缆支架涂塑电缆支架、包塑电缆支架、热镀锌电缆支架
咨询热线:15589928777
0531-88606796
新闻资讯

当前位置:主页 > 新闻资讯 > 新闻资讯 >

高铁专用电缆支架安装有几个步骤?

2017/07/06  浏览次数:

  高铁专用电缆支架安装具体有几个步骤?安装电缆支架选需要准备的事项有:一套支架包括玻璃钢立柱、托臂、销子(螺栓)和高分子固定帽,安装工具为普通电钻、钻头、扳手。

  High iron special cable bracket concrete there are several steps? Matters need to prepare for the installation of cable support preferred: a glass bracket comprises a steel column and a bracket, a pin (bolt) and polymer fixing cap, installation tool for ordinary drill, drill and spanner.

  1、立柱安装:立柱背面定位线带有安装孔,孔径Ф12.5,根据安装施工图及立柱安装孔位置,用M12膨胀螺栓将立柱固定在墙上,螺栓和立柱之间必须加装垫片,槽形立柱尽可能贴紧墙面。

  1, post installation: column back positioning line with mounting holes, with aperture 12.5, according to the installation drawings and post installation hole position, using M12 column expansion bolts fixed on the wall between the bolt and the column must be installed gasket groove shaped column as far as possible close to the wall.

  2、电缆:将电缆拖至电缆支架安装位置。

  2: Cable: cable to cable support installation position.

  3、托臂安装:根据托臂层间距要求,立柱两侧定位线上已预留有装配孔,孔径Ф8.5;用螺栓将托臂固定在槽型立柱上,螺栓松紧适度,螺栓和立柱之间注意必须加装垫片。

  3, the installation: according to the arm spacing, upright position on both sides of line has been set aside with a mounting hole, the aperture diameter of 8.5; the bracket is fixed on the groove column bolt, bolt and bolt upright between moderate tightness, attention must be paid to the installation.

  4、电缆就位和固定:将电缆摆放在支架上并绑扎好,摆放时尽量将重的电缆放在托臂根部。

  4, place: fixed cable and cable placed on the bracket and lashing, placed as the heaviest on the cable roots.

  • 山东久丰伟业不锈钢工程有限公司  联系人:刘经理; 
  • 电话:0531-88606796; 传真:0531-88601877
  • 手机:15589928777;   网址:www.sdjfwy.cn    
  • 地址:济南市历城区工业北路159-19号
  • 技术支持:企力网一站式网络营销推广方案
  • 备案号:鲁ICP备16041896号-2
  • 网站地图 /XML地图
网站声明:

本站部分素材搜集来源网络,如内容有侵权,请联系我司立即删除!本站内容按照相关法律法规进行编写;如有不当请联系我司立即删除!

在线客服